- Home
- ยป
- Products & Services
- »
- Epoxy Products
Epoxy Products
Coal Tar Epoxy Coating And Screeding Service
Minimum Order Quantity: 100 Litre
Product Brochure
Usage/Application | Industrial Use |
Grade Standard | Industrial Grade |
Color | Black |
Packaging Size | 20 Ltr |
No. Of Components | Single Component |
Application Method | Brush |
Specifications:
- Thickness:1 - 110 mm
- Section Shape:Round
- Outer Diameter:6 - 1200 mm
- Technique:Cold Drawn
- Surface Treatment:Galvanized
Click The PDF For More Details :
Additional Information:
- Production Capacity: 100 MTS
- Delivery Time: Ex-Stock
- Packaging Details: 20 Kgs
Epoxy Grout for Foundation Bolt
Product Brochure
Brand | Chemiprotect |
Usage/Application | Construction |
Packaging size | 5 kg |
Packaging Type | Container |
Color | Brown |
Country of Origin | Made in India |
Cement Mortar Filling has few disadvantages:
- Longer setting & curing time
- Not resistant to oils, fuels and other chemicals
- Cracking due to vibration & high loading i.e. poor physical properties
- High shrinkage on curing
Properties:
- Fast setting & curing time
- Resistant to oils, grease, fuels and corrosive industrial chemicals
- Very low shrinkage resulting in good dimension stability
- High early mechanical strength
- Excellent adhesion to concrete & met surface
- Excellent vibration absorbing properties
Mixing:
The resin, curing agent and filler components are weighed perfectly in the correct ratio. Then mix it manually or by mechanical mixer to obtain a uniform color mix of all the above components. It is recommended to let the mixed material stand free for few minutes to release entrapped air.
Application:
To get highest bond strength, apply one primer coat of unfilled resin & curing agent in
recommended mix ratio is to be applied on both concrete & steel surface. Allow it to touch dry
stage. Then grouting the mix care should be taken to avoid any air pockets. Tamping with rods or vibrator is recommended, as a suitable measure.
Surface Preparation:
To get good result, it is necessary that both the concrete & steel surface should be clean and free from any oil, grease. The foundation bolt/base plate should be prepared thoroughly wire-brushing or roughening with emery paper. Degreasing with a solvent like acetone, benzene or toluene is then recommended. Please see technical data sheet on surface standards for
more information.
Physical Properties:
Specific Gravity | 1.8 | 2 |
Compressive Strength kg/ Cm2 | 700-900 | 800-1000 |
Flexural Strength kg/cm2 | 450-500 | 300-400 |
Consistency | Flow Able | Tampable |
Pot Life @ 25o C Min. | 45-60 | 45-60 |
Industrial Epoxy Flooring
Product Brochure
Brand | Mipro |
Usage/Application | Industrial |
Packaging Size | 17.500 Kgs. |
Type | Solvent Free |
Thickness | 0.3 to 10mm |
Standard | EN |
Grade | Industrial |
Structurally Insulated | Yes |
Application | Floor |
Country of Origin | Made in India |
Features:
- Affordable
- Marvelous appearance
- Rigorous quality
Description from Product Brochure :-
Application Procedure | Thoroughly prepare the floor surface, if necessary repair and level the floor surface. Apply primer MIPRO-EP solvent-free epoxy primer by roller and allow to cure. Apply MIPRO-E S/L floor topping by trowel, squeegee or roller. Thoroughly spike roll the MIPRO-E S/L and allow to cure installation time will vary with site conditions, the areas involved and the system chosen. |
Benefits | Anti-bacterial and Anti-fungal properties, Seamless & hygienic finish, no crevices where dirt and bacteria can dwell., Excellent chemical resistance to sugar & acid., Easy to clean & sterilize, low maintenance requirement., Attractive, light reflectance appearance., High abrasion resistance., Solvent free; low odor. Fast installation. |
Chemical Resistance | -Acetic acid 5%: Good -Acetone: Excellent -Caustic soda: Good -Citric acid: Limited -Detergents: Limited -Hydrochloric acid 10%: Excellent -Lactic acid 10%: Limited -Light Traffic: 36 hrs @ 100C, 24 hrs @ 00C -Methanol: Good -Oil: Good -Petrol: Limited -Sugar syrups: Limited -Sulphuric acid 25%: Good |
Description | MIPRO-E S/L is a seamless, self-leveling epoxy flooring system laid between 2-3mm in a single application. |
Finish | Gloss |
Mixing | Pack components are pre-weighed for optimum performance. Never split or proportion packs. Add hardener B to base A in a mixing container. Mix with a slow-speed drill and helical spinner, or in a pan tight mixer, until uniform. Mix in the filler C in binder (A+B) with a drill and helical spinner, or in a pan type mixer until uniform. Take care not to entrain air. |
High Chemical Resistant Epoxy Coating MIPRO-EC (HYB)
Product Brochure
Packaging Size | 20 Kg |
Usage/Application | Industrial Use |
Category | Floor Coating |
Types | Solid |
Grade Standard | Industrial Grade |
Country of Origin | Made in India |
Our company has achieved widespread recognition in offering High Chemical Resistant Epoxy Coating to the clients. This product is well appreciated for attributes such as reduces dirt pick-up, improves weather resistance, reduces freeze/thaw damage , reduces efflorescence, leaves a tack free natural surface, allows masonry to breath and so on. Offered range is rendered by a team of widely skilled and experienced professionals. High Chemical Resistant Epoxy Coating is processed by experts in compliance with quality standards using high quality raw material and advanced machines.
Features:
- High strength
- Perfect quality
- Moisture and chemical resistance
Description from Product Brochure :-
Color Shades | All Standard Shades |
Covering Capacity | 4-5 sq.met/kg per coat depending on porosity, roughness & method of application |
Dry Film Thickness | 125-150 Microns per coat depending on porosity |
Drying Time | 30 Minutes (Touch Dry), 6 Hours (Hard Dry) |
Durability | Dependent on the adhesion between sub-base and coating material |
Handling and Safety | Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. If it comes in contact with the body, wash affected parts with plenty of water and contact a doctor. |
Intercoat Interval | 6-8 Hours Minimum |
Mixing Ratio | As Directed on Packing |
Pot Life | 30 Minutes |
Epoxy Floor Coating
Product Brochure
Usage/Application | Floors |
Grade Standard | Chemical Grade |
Color | White |
No. Of Components | Two Component |
Types | Solid |
Features | Chemical Resistant |
Packaging Type | Bucket |
Form | Liquid |
Shelf Life | 24 Months |
Finish | High Gloss |
Benefits:
- Hygienic - seamless and hygienic finish, no crevices where dirt and bacteria can dwell.
- Hard wearing - good abrasion resistance for semi heavy mechanical loads.
- Excellent adhesion – good adhesion to most substrates.
- Food Grade - low odor and safety during application.
Specification:
New concrete and masonry must be allowed to cure for minimum of 28 days. Substrate to be coated must be sound, clean and free from any contamination Mechanical stone grinding should be employed followed by thorough vacuuming. Apply 2-3 coats of MIPRO-EC at a spreading rate of 5m2/kg/coat at an interval of
minimum 8 hours. All applications must be carried out in accordance with manufacturer's written instructions.
Technical Details:
Compressive Strength | 45 N/mm2 |
Tensile Strength | 12 N/mm2 |
Flexural Strength | 20 N/mm2 |
Abrasion Resistance – Taber (CS-17 Wheel) |
0.25 gm/1000gm.loading / 1000 rpm |
Bond Strength (ACI Committee #503) |
>400 psi (100 % concrete Failure) |
Temperature Resistance | 600C (dry) |
Hardness (Shore D) | 70 – 75 |
Solid Content (mixed) | 100.00% |
No. of Coats Recommended |
2 |
No. of Component | 2 |
Mixing Ratio | 4:1 by weight of Part A & Part B |
Pot Life | 45 mins. At 250C |
Cleaner | Washing Thinner |
Packaging | 5kg |
Storage & Shelf Life | Unopened in dry conditions at 100C – 250C / 12 months |
Estimated Coverage | 4m2/kg/coat |
Chemoxy- EG Epoxy Grout. High Strength, Water Wipeable
Minimum Order Quantity: 20 Kg
Product Brochure
Brand | Chemiprotect |
Usage/Application | Construction |
Packaging Size | 1kg & 5 kg |
Packaging Type | Container |
Color | Red |
Country of Origin | Made in India |
We manufacture a wide range of Epoxy Grouts . A very easy to use epoxy resin based material for grouting/joints-filling material for ceramic & vitreous tile, glaze tile, acid resistant bricks & tiles, kota stone, red mandana stone etc.This novel epoxy rein base grout/joints-filling compound is supplied in a three parts mortar-resin, curing agent and specially formulated powder packed in the proper ratio for easy mixing and handling. This Epoxy Grout exhibits excellent adhesion to concrete/tile/brick/stone surfaces, providing permanent, sanitary, chemical resistant joints that will not shrink. The consistency of Epoxy Grout permits it to be used for walls, cove base an as a bedding material for setting tiles, bricks, stones etc.
Features:
An unique Wacker handle design
Simple-to-change Blade pitching mechanism
A true guard ring
Self-adjusting centrifugal clutch
Epoxy Mortar
Product Brochure
Usage/Application | Construction |
Application | Flooring |
Standard | EN |
Material | Cement |
Packaging Type | Bag |
Flexural Strength | 150 kg/cm2 |
Color | Brown |
Water Absorption | 1% |
Compressive Strength | 500 kg/cm2 |
Maximum Temperature | 60 C |
Bond Strength | 10 kg/cm2 |
Setting Time | 8-10 hrs. |
Country of Origin | Made in India |
Area Of Application:
Due to very low absorption and very high chemical & physical properties MIPRO-E can be used for acid resisting brick/tile lining, on floors, drains, reaction & storage vessels, sumps, effluent treatment plants of food/pharmaceuticals, Breweries, Dairies, Water treatment plants etc.
Physical Properties:
Color | Brown |
Mix Ratio by wt. Binder to Powder | 1: 3.75 to 4.5 |
Compressive Strength kg/cm2 | 500 |
Flexural Strength kg/cm2 | 150 |
Bond Strength kg/cm2 | 10 |
Water Absorption | 1.00% |
Max. Temp. | 60 C |
Setting Time Hours | 8-10 hrs. |
Application:
After proper mixing, mortar should be buttered on back and sides of bricks/tiles to be laid. Apply little
more mortar and after lying squeeze the excess mortar. If only joints filling are done, be sure that full depth of joints is filled with mortar. There should not any air pocket in the joints. During & after completion of the installation, area must be kept dry and free from any other materials.
Chemical Resistance:
Epoxy Mortar is highly resistant to acids, alkalis, salts, solvents, greases, detergents etc. However it is not
recommended against strong mineral and oxidizing acids.
Storage & Shelf Life:
Always keep resin, hardener and powder in cool, dry place, away from direct sunlight and moisture. If stored in sealed containers and bag shelf life of Resin, Harder & Powder will be one year.
Packing:
As required by customer.
Health & Safety:
In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
Epoxy Flooring
Product Brochure
Usage/Application | Industrial |
Packaging Size | 25 L |
Standard | EN |
Color | Multicolor |
Structurally Insulated | Yes |
Application | Floor |
Country of Origin | Made in India |
Features:
- Attractive design
- Reasonable price
- Customized
Description from Product Brochure :-
Benefits | -Anti-bacterial and Anti-fungal properties: -Attractive, light reflectance appearance: -Easy to clean & sterilize, low maintenance requirement: -Excellent chemical resistance to sugar & acid: -High abrasion resistance: -Seamless & hygienic finish: -Solvent free; low odour. Fast installation: |
Colours Available | Standard Flooring colours. Other colours. Can be matched upon request. |
Description | MIPRO-E S/L is a seamless, self-leveling epoxy flooring system laid between 2-3mm in a single application. |
Finish | Gloss |
Recommended Uses | To provide an easy to clean, hygienic, anti-fungal and anti-bacterial finishes, chemical resistant and hard-wearing floor finish. Typical areas for use are food, pharmaceuticals, bottling plants, packaging plants, breweries, engineering and automobile industries, chemical industries and many more. |
Technical Data | -Abrasion resistance: <0.05mm -Bond strength: -Cohesive strength of concrete: -Compressive strength: 55 N/mm2 -Decontamination classification: -Estimated Coverage: At 2mm, 4.5 per pack of 15 kgs. -Flexural strength: 33 N/mm2 -Full traffic: 20 hrs @ 100C, 10 hrs @ 00C -Fully cure: 200C -Impact resistance: Good -Light traffic: 36 hrs @ 100C, 24 hrs @ 00C -Mixing Ratio: As mentioned on pack by weight of Part A, Part B & Part C -No. of components: 3 -Packaging: 17.5 kgs -Pot life: 90 min @ 100C, 60 min @ 200C -Storage & Shelf life: Unopened in dry conditions at 100C-250C /12 months -Tack free time: -Water absorption: 0% |
Epoxy Floor Coating
Product Brochure
Brand | Mipro |
Usage/Application | Floors |
Packaging Size | 20 Kgs. |
No. Of Components | 3 Components |
Types Of Epoxy Coating | Self Leveling Epoxy Coatings |
Category | Floor coating |
Material | Epoxy |
Grade Standard | Chemical Grade |
Application Method of Coating | Roller |
With the assistance of our qualified team members, we are able to provide a quality range of products to our clients. Further, we also have proficiency to offer these products in customized specifications as well. We also provide free samples of our products in order to facilitate our clients to order as per their specifications. Our products are packed in premium quality HDPE, Paper Bags & HDPE/MS Drums. Above all, we have got some renowned names as our clients like Tata Projects, Essar and Reliance.We export our products in East Asia, Middle East, South East Asia and Indian Subcontinent.
Water Base Epoxy Primer
Product Brochure
Packaging Size | 20 ltr |
Packaging Type | Bucket |
Finish Type | Gloss |
State/Form | Liquid |
Surface of Application | Floor |
Used | Primary odat |
We are the famous company known for providing Water Base Epoxy Primer to the clients. Offered range is tested on predefined standard quality parameters, this product is highly recognized in the market for eco- friendly quality, excellent adhesion and fast settling time. This product is widely used before the application of paint and makes the surface smooth and waterproof. Offered range is also used as a primary coat on metal substrates to give superior inter-coat adhesion and hence better corrosion resistance. This product is stringently tested by qualified quality analyzers on each level of packaging to ensure flawless and defect free delivery. This product is made under the supervision of experienced team of professionals using advanced techniques.
Features:
- Quick dryness
- Long shelf life
- Odorless
Abrasion Resistant Epoxy Flooring
Product Brochure
Packaging Size | 10 kg |
Type | Epoxy |
Thickness | 3 mm |
Finish | Glossy |
Shelf Life | 5 year |
Location | All over India |
- These services are done under the command of dexterous workers and adroit employees
- We work accordingly to our client’s need
- Cost-effectiveness
Acid Resistant Coating Services
Product Brochure
Types Of Coatings | Industrial Coatings |
Applications Areas | Commercial Kitchens |
Applications Methods of Coating | Brush |
Service Location | All over India |
Service Mode | Offline |
Service Duration | 5-7 days |
Description from Product Brochure :-
Abrasion Resistance | Taber (CS-17 Wheel) - 0.25 gm/1000gm.loading / 1000 rpm |
Clean Up | Use hot, soapy water before material gels, solvents required after gelling |
Compressive Strength | 45 N/mm2 |
Description | MIPROGLASS 101 E (HYB) is a 100% solids, glass flake filled Novolac epoxy coating for steel and concrete surface coating. It offers excellent resistance to acids, alkalis, and chemicals. |
Flexural Strength | 20 N/mm2 |
Hardness | Shore D - 75 |
Mixing Ratio | 5:1 by weight of Part A to Part B |
No. of Coats Recommended | 2 or multiple coats as per required thickness |
Packaging | 6 Kgs & 30 Kgs |
Pot Life | 45 minutes @ 25ยฐC |
Solid Content | 95 to 100% |
Epoxy Residential Flooring
Product Brochure
Available Services | Installation |
Service Location Type | Residential Building |
No. of Year in Business | 25 Years |
Service Location/City | India (Over Seas) |
Provide AMC | Yes |
Other Flooring Services | PU/PVC Flooring |
Feature | Chemical Resistant |
Material | Mipro |
Minimum Flooring Area(In Sq Ft) | 1076.39 Sq Ft |
Is It Provide AMC | Provide Amc |
Finish | Matte & Glossy |
Price Range- 1500 To 3000 Square Meter
Features
- Non poisonous
- Very effective
- Widely demanded
Benefits
- Seamless & hygienic finish , no crevices where dirt and bacteria can dwell.
- Excellent chemical resistance to sugar & acid.
- Easy to clean & sterilize , low maintenance requirement.
- Attractive , light reflectance appearance.
- High abrasion resistance.
- Solvent free; low odor.
- Fast installation.
Colors
Available in Standard Flooring colors. Other colors can be matched upon request.
Technical Data
Bond strength | Cohesive strength of Concrete |
Compressive strength | 55 N/mm2 |
Water absorption | 0 |
Abrasion resistance | <0.05mm |
Flexural strength | 33 N/mm2 |
Impact resistance | Good |
Decontamination classification | Good |
Pot life | 90 min @ 100C 60 min @ 200C |
Light traffic | 36 hrs @ 100C 24 hrs @ 200C |
Tack free time | 20 hrs @ 100C 10 hrs @ 200C |
Full traffic | 72 hrs @ 100C 48 hrs @ 200C |
Fully cure | 12 days @ 100C 7 days @ 200C |
No. of components | 3 |
Mixing Ratio | As mention on pack by weight of Part A, Part B & Part C |
Packaging | 15 kgs |
Storage & Shelf life | Unopened in dry conditions at 100C- 250C /12 months |
Estimated Coverage | At 2mm , 4.5 per pack of 15 kgs |
Chemical Resistant Epoxy Coating Services
Product Brochure
Category | Floor coating |
Method | Brush |
Application Method Of Floor Coating | Brush |
Coverage | Depends on thickness |
Material | Epoxy |
Thickness | 4 mm |
Description from Product Brochure :-
Chemical Resistance | For information on the chemical resistance of each of these grades please contact CHEMIPROTECT ENGINEERS Corrosion Resistance Guide, under the appropriate code letter. |
Colors | The standard colors available are red, green, gray, off white, but other colors are available to special order. |
Cure Times | Cure times will vary with ambient temperatures and quantity of catalyst used. Typically they can be over coated within 2-3 hours and are hard in 4-8 hours. The coating will not be fully cured until about 72 hours after application but can go into light duty service after 24 hours. |
Description | A series of medium duty polyester, vinyl ester, Epoxy resin base coating designed to protect steel and concrete work against atmospheric corrosion and the exterior surfaces of tanks and process plant against the splashing and spillage of chemicals. Each of the MIPROGLASS 101 coatings is reinforced with properly graded glass flakes, which lie parallel to the substrate thereby offering excellent resistance to permeation, corrosion, abrasion, physical abuse and thermal shock. MIPROGLASS 101 (I, B, V series coatings will withstand gas temperatures up to 120 C, and can be used in immersion service at ambient temperatures. All the MIPROGLASS 101 series coatings can be applied by brush or by spray, they are approx. 90-100% solids, and cure at ambient temperature. The recommended thickness is approx. 400-500 microns and this is obtained in one primer and two to four coats depending on different application environment. MIPROGLASS 101 series linings are formulated from one of these 5 high performance resins: - MIPROGLASS 101 I, MIPROGLASS 101 B, MIPROGLASS 101 V, MIPROGLASS 101 SV, MIPROGLASS 101 E. Isophthalic polyester, Bisphenol polyester, Vinyl ester, Vinyl ester โ superior grade, Epoxy, MIPROGLASS 101 E (HYB) Hyb. Epoxy |
General Information | -% Solids by Volume: Theoretical 98% at time of mixing. Practical typically 80% + 5%. All Vinyl/polyester resin systems are subject to monomer loss and material Shrinkage during application and curing. -In microns per coat: dry: 180-200 -Overcoating Times: Indefinitely over coatable (if clean and dry). -Recommended Cleaner: Cleanser No.1 Cleaning only. Thinning not recommended. -Shelf Life: 4-6 months at 25oC. |
Epoxy Primer
Product Brochure
Brand | MIPRO |
Usage/Application | Floors |
Grade Standard | Industrial Grade |
Packaging Size | 20 Ltr |
No. Of Components | Two Component |
Packaging Type | Drum |
Form | Liquid |
Country of Origin | Made in India |
Solvent Free Epoxy Primer
Product Brochure
Usage/Application | Floors |
Grade Standard | Industrial Grade |
State/Form | Liquid |
Packaging Type | Bucket |
Packaging Size (ex. 1L or 1Kg) | 20 kg |
Temperature | 60 degree c |
Solvent free Epoxy Primer is a durable solvent free and easy apply epoxy resin coating. When cured, it forms a gloss, seamless and impervious finish which is easily cleaned. Available in a wide range of colors and in clear. Epoxy is a term used to denote both the basic components and the cured end products of epoxy resins, as well as a colloquial name for the functional group. Epoxy resins may be reacted either with themselves through catalytic homopolymerisation, or with a wide range of co-reactants including polyfunctional amines, acids (and acid anhydrides), phenols, alcohols and thiols. These co-reactants are often referred to as hardeners or curatives, and the cross-linking reaction is commonly referred to as curing.
Specifications:
Temperature resistance:60oc
Pot Life:30 mins at 32oc
Drying Time:2 to 3 hour
Packaging:5 and 20 kg
Additional Information:
- Item Code: Mipro-EC